User Guide
Table Of Contents
- Contents
- Preface
- 1.1.1 Make a 3D Model
- 1.1.2 Slice and Export the 3D Model
- Chapter 2: About Creator Pro
- 2.1 About Your Creator Pro
- 2.1.1 Views
- Chapter 3: Unpacking
- Chapter 4: Hardware Assembly
- Chapter 5: Build Plate Leveling
- Chapter 6: About Software
- This chapter talks about the basic function of Fla
- 6.1 Software Installation
- 6.2 Exploring FlashPrint
- ①Changing views
- ②Set View
- ③Reset View
- ④Show Model Outline
- ⑤Show Steep Overhang
- 6.2.5 Move
- 6.2.6 Rotate
- 6.2.7 Scale
- 6.2.8 Cut
- 6.2.9 Extruder
- 6.2.10 Supports
- ②Auto Supports
- ③Add Supports
- ④ Clear Supports
- Click [Clear Supports], all supports will be delet
- ⑤Delete Supports
- 6.2.11 Print
- ①New Project
- ②Saving
- ③ Preferences
- 6.2.13 Edit Menus
- 6.2.14 Tools
- 6.2.15 Help Menus
- 7.1 Generate a Gcode
- 7.1.1 Installing Filament
- 7.2 Loading the Filament Using the LCD Panel
- 7.3 Unloading the Filament Using LCD Panel
Creator Pro User Guide | www.FlashForge.com 400-699-1063
47
Heating:
R Extruder: 033/230C
L Extruder: 033/230C
Platform: 024
This means the left extruder is heating up, when it reaches 220°C. First push in the
filament a little bit until you see filament come out of the nozzle, then pull it out
quickly. This will ensure you have withdrawn the filament inside the nozzle
successfully.
Then, users should
1. Insert your SD card with target x3g file to your Creator Pro. .
2. Turn on the Creator Pro.
3. Select [Print from SD] on the LCD panel.
4. Select the file you want to print and press [OK].
5. And the printer will heat up the nozzle and the build plate automatically and start to
print after the nozzle and the build plate reaches the aimed temperature.