User Guide
Table Of Contents
- Contents
- Preface
- 1.1.1 Make a 3D Model
- 1.1.2 Slice and Export the 3D Model
- Chapter 2: About Creator Pro
- 2.1 About Your Creator Pro
- 2.1.1 Views
- Chapter 3: Unpacking
- Chapter 4: Hardware Assembly
- Chapter 5: Build Plate Leveling
- Chapter 6: About Software
- This chapter talks about the basic function of Fla
- 6.1 Software Installation
- 6.2 Exploring FlashPrint
- ①Changing views
- ②Set View
- ③Reset View
- ④Show Model Outline
- ⑤Show Steep Overhang
- 6.2.5 Move
- 6.2.6 Rotate
- 6.2.7 Scale
- 6.2.8 Cut
- 6.2.9 Extruder
- 6.2.10 Supports
- ②Auto Supports
- ③Add Supports
- ④ Clear Supports
- Click [Clear Supports], all supports will be delet
- ⑤Delete Supports
- 6.2.11 Print
- ①New Project
- ②Saving
- ③ Preferences
- 6.2.13 Edit Menus
- 6.2.14 Tools
- 6.2.15 Help Menus
- 7.1 Generate a Gcode
- 7.1.1 Installing Filament
- 7.2 Loading the Filament Using the LCD Panel
- 7.3 Unloading the Filament Using LCD Panel
Creator Pro User Guide | www.FlashForge.com 400-699-1063
48
Chapter 8: About function
In this chapter, we will introduce the Creator Pro function to you. We will mainly
introduce Utilities function and other available functions in printing process, as Print
from SD and Preheat are introduced in prior chapters.
Turn on your Creator Pro
Turn on your Creator Pro; the display will indicate:
▶ Print from SD Refer to Chapter 7
Preheat Refer to Chapter 7
Utilities
Utilities
Using the directional arrow buttons in the right of the screen to select Utilities,
Press OK key on the keypad, then you will see:
●Monitor Mode
select it and then press OK ; the display will indicate:
Printer name
Printing progress
R Extruder
L Extruder
Platform
●Filament loading Refer to Chapter 7
●Preheat Setting Refer to Chapter 7
●General Settings
select it and then press OK ; the display will indicate:
Ditto Printing (The dual-extruder print one model simultaneously)
Override GcTemp (Reselect)
Pause with Heat (Whether continue heating when pause printing)