User Guide
Table Of Contents
- Contents
- Preface
- 1.1.1 Make a 3D Model
- 1.1.2 Slice and Export the 3D Model
- Chapter 2: About Creator Pro
- 2.1 About Your Creator Pro
- 2.1.1 Views
- Chapter 3: Unpacking
- Chapter 4: Hardware Assembly
- Chapter 5: Build Plate Leveling
- Chapter 6: About Software
- This chapter talks about the basic function of Fla
- 6.1 Software Installation
- 6.2 Exploring FlashPrint
- ①Changing views
- ②Set View
- ③Reset View
- ④Show Model Outline
- ⑤Show Steep Overhang
- 6.2.5 Move
- 6.2.6 Rotate
- 6.2.7 Scale
- 6.2.8 Cut
- 6.2.9 Extruder
- 6.2.10 Supports
- ②Auto Supports
- ③Add Supports
- ④ Clear Supports
- Click [Clear Supports], all supports will be delet
- ⑤Delete Supports
- 6.2.11 Print
- ①New Project
- ②Saving
- ③ Preferences
- 6.2.13 Edit Menus
- 6.2.14 Tools
- 6.2.15 Help Menus
- 7.1 Generate a Gcode
- 7.1.1 Installing Filament
- 7.2 Loading the Filament Using the LCD Panel
- 7.3 Unloading the Filament Using LCD Panel
Creator Pro User Guide | www.FlashForge.com 400-699-1063
49
Sound
Acceleration
Extruder Count
●Level Build Plate
Build plate leveling refers to Chapter 5
●Home Axes
Select it and then press OK. The dual-extruder will move backwards, and the build
plate will elevate up. It means Creator Pro is ready for printing.
●Bot Statistics
select it and then press OK ; the display will indicate:
Lifetime (Accumulated time for printing)
Last Print (Spent time for the last printing)
Filament (Accumulated filament length for printing)
Fil. Trip (Accumulated filament length for printing)
●Filament Odometer
select it and then press OK ; the display will indicate:
Life (Accumulated filament length for printing)
Trip (Accumulated filament length for printing)
Reset (Press OK to reset the Trip data)
●Profiles
select it and then press OK ; the display will indicate:
ABS
PLA
Profile1
Profile2
Select any option and press OK; the display will indicate:
Restore (Back to Utilities)