User's Guide

E3 Pro User Guide | www.flashforge.com 0086-0579-82273989
52
6-19
If successfully connected, you will see the following red mark.
②Connect E3 Pro with your PC under STA mode
a. Turn on the WIFI of E3 Pro and connect your PC with E3 Pro via the WIFI.
Press [ Tools ], [ Setting ], [ WIFI ], and [ WIFI ON].
b.“E3 Pro” continuous signal will be found available on the network list.
c. Once your PC is connected with your E3 Pro. Open the Internet browser and
enter “10.10.100.254” and enter the default user name(admin) and
password(admin).
6-20

You will enter the WIFI setting panel, it displays as follows: