User's Guide

E3 Pro User Guide | www.flashforge.com 0086-0579-82273989
6
gloves away from moving parts.
④ Do not operate the device while you are tired or under the influence of drugs,
alcohol or medication.
· Cautions
① Do not leave the device unattended for long.
②
Do not make any modifications to the device.
③ To lower the build plate before loading/unloading filament. (The distance between
the nozzle and build plate should be kept for at least 50mm)
④
Operate the device in a well-ventilated environment.
⑤ Never use the device for illegal activities.
⑥ Never use the device to make any food storage vessels.
⑦
Never use the device to make any electrical appliance.
⑧ Never put the model into your mouth.
⑨ Do not remove the models with force.
⑩ Never connect the device with network cable longer than 3m.
· Environment Requirements
Temperature: RT 15-30
℃
Moisture: 20%-70%
· Filament Requirements
Do not abuse the filament. Please make sure you use the Flashforge filament or the
filament from the brands accepted by Flashforge.
· Filament Storage
All polymers degrade with time. Do not unpack until filament is needed. Filament