User's Guide

E3 Pro User Guide | www.flashforge.com 0086-0579-82273989

Next, we are going to print the model.

7.2 Print Methods

After generating the Gcode file, you can transfer it to your E3 Pro. You can transfer

the file through USB cable and USB stick.

7.2.1 Print from Computer (USB connection)

①Connect your E3 Pro with your PC via a USB cable.

②Turn on your E3 Pro, level the build plate and load the filament.

③ Click [Print] and transfer your Gcode file to your E3 Pro. After completing

transference, the printer will heat up automatically. And when heating finishes, the

print will start to build the model.

7-8

④When your PC connects with FlashPrint successfully. The status box on the

bottom right displays the real-time nozzle temperature. After finishing preheating,

your E3 Pro starts the print job directly.

7.2.2 Print from Computer (WIFI connection)

① Connect your E3 Pro with your PC via WIFI.(Please refer to 6.1.13)

② Turn on your E3 Pro, level the build plate and load the filament.

③ Click [Print] and transfer your Gcode file to your E3 Pro. After completing