Instructions

Nehmen Sie die Erstkalibrierung bitte mithilfe des Kundendienstes vor.
[Z-Achsenkalibrierung]
1. Nehmen Sie die Nivellierung vor der Kalibrierung der Z-Achse vor; siehe Seite 12.
Berühren Sie am Touchscreen nacheinander [Tools]-[Einstellungen]-[Kalibrierung].
2. Berühren Sie [Z-Achsenkalibrierung] und warten Sie, bis die Kalibrierung zwischen Düse und Z-Achse abgeschlossen wurde.
3.4 Kalibrierung
[Setting]-[Calibration]-[Sensitivity]
[Sensitivity]: shows the sensitivity of sensor in the nozzle. The higher the value, the lower the sensitivity; When the sensitivity is too
strong, it may cause an error report of z-axis calibration abnormal. When the equipment often prompts the z-axis calibration
abnormal, please adjust the sensitivity of the sensor;Increase the value. This function is factory default setting.
How to use this function?
When creator3 keeps reminding "please recalibration z-axis” or "z-axis error" before printing, and the platform
continues to move upward after touching with the nozzle during manual adjustment.Your printer's sensor of z axis
calibration may have malfunctioned.
Please follow the following steps to adjust.
18