Instructions

Notes on mirror and duplicate mode:
Duplicate and mirror mode:
Since the heights of the left and right sprinkler heads are different after installation, the software will automatically add a
compensation layer to compensate for the difference in height when slicing, so that the printing heights of the left and right sides
are the same.When the z-axis is calibrated, take the right nozzle as the reference and record the height difference of the left and
right nozzle.
Left nozzle is lower than right nozzle： right nozzle prints cal pad；
Right nozzle is lower than left nozzle： left nozzle prints cal pad；
The height difference is less than 0.2mm, cal pad will not be printed.
Compensation layer with height difference less than 0.2mm does not print.
The compensation layer（Cal pad） is printed first.Easy to remove by sticking to the raft.If the raft is not added, the compensation
layer directly acts on the model, which is difficult to remove.
So we highly recommend to add a raft when choosing mirror or copy mode to print.
26