User Manual

Quarter Fender

Mounting Instructions

50-foot pounds of torque is needed on the steel clamp

and 75 foot pounds of torque is needed on the stain-

less clamp. This torque is to be applied to the nut

instead of the bolt. When this torque is applied, the

ﬂange end of the clamp should touch.

Recommended quarter fender mounting will

result in maximum fender & top ﬂap product life.

Installation Sheet #INS-97001

Installation Sheet # INS-97001 • 97 • Rev. E 12/06

.50" Minimum • 2.00" Desired

PLASTIC:

3.5" Minimum

4.5" Desired

METAL:

3" Min. S.A.E.

Recommended

Clearance

Allowable

Space Between

Fender & Tire

Mount quarter fender so top of ﬂap is

lower than top of level ﬁfth wheel.

IMPORTANT:

Always allow for maximum suspension deﬂection.