Installation Guide

FleetQi
TM
Install Instructions.
Key Less, Live More!™
Teamxiq.com
Checklist before Installation
❏ I have an Electric Golf Cart
❏ The maximum current through the ignition switch does not exceed 2 Amps when the
Golf Cart and all accessories are turned on.
Checklist after Installation
❏ Your Golf Cart does not drive when FleetQi
TM
is off and throttle is engaged.
❏ All connections are secure and won’t come off due to driving vibrations.
CAUTION: The FleetQi
TM
is designed to operate cart ignitions and monitor the battery power levels (*see battery meter advisory
below). Therefore, it performs best under the specific set of conditions described in the installation process. Please install exactly as
directed. DO NOT attempt to connect the FleetQi
TM
in series to other accessories such as speakers, lights, voltage regulators, etc.
Doing so will hinder or prevent optimum FleetQi
TM
performance.
No more than 2 Amps of maximum current through the FleetQi
TM
!
Make sure that connectors are mated correctly the first time. Disconnecting and reconnecting this style of connector can
damage the factory crimped wiring assembly!
*The FleetQi
TM
battery meter is designed to give helpful power level readings for your electric cart. Various cart makes and models
have differing power configurations that result in slight readout inconsistencies. Although we strive to provide as accurate a reading
as possible, the battery meter should be used as a guide. As you gain more experience with your FleetQi
TM
, you'll be able to
understand better meter accuracy as you determine which readouts coincide with your particular cart's power levels.