Installation & Assembly

Assembly Instruction
1. Identify all parts packed in carton against the part list. Remove all protective
material carefully and avoid cutting the surface of the furniture while removing
the wrapped material.
2. Touch the table top to turn it upside down on a non-abrasive ,flat surface .Take off
the plastic cup from the screws which are underneath the table top , attach all legs
with flat washers,lock washers and nuts. Don’t tighten at this time.
3. Take off the plastic cap from the screw inside the leg, then loosely attach the table
attachment to the legs with flat washer and nut .Progressively tighten all the nuts
on the base until secure .
4. Turn the table on its legs , then adjust foot plug to level table.
Parts Description Quantity Parts Description Quantity
Table top 1
Nut 12
Attachment
4
Flat
Washer
12
Leg 4
Lock
Washer
12
Bolt 12
Warning: Do not force components and overtighten the nuts during assembly.
Don’t touch the leg when you turn the table top upside down.