Owners manual

Mounting Instructions-155 may be
installed horizontally or vertically to the
radiator
Assemble the brackets and threaded rods to the 155
fan according to the specific applicaiton. Mount the
155 with brackets using either the bolt-on or clamp-on
method.
Clamp-on Method
Star Nut
Washer
Black Magic
Be sure to use star nuts to stabilize the threaded rods.
Do not over tighten to the radiator,damage may occur.
Bolt-on Method
Radiator (Front)
Nut

Threaded
Rod



Bracket
Radiator
Channel

Notes:
155
revised 01-02-06 99155
The Flex-a-lite Limited Warranty
Flex-a-lite Consolidated, 7213-45th St. Ct. E. Fife, WA 98424, Telephone No. 253-922-2700, warrants to the original purchasing user, that all Flex-a-lite products to be free of
defects in material and workmanship for a period of 365 days (1 year) from date of purchase. Flex-a-lite products failing within 365 days (1 year) from date of purchase may
be returned to the factory through the point of purchase, transportation charges prepaid. If, on inspection, cause of failure is determined to be defective material or workmanship
and not by misuse, accidental or improper installation, Flex-a-lite will replace the fan free of charge, transportation prepaid. Flex-a-lite will not be liable for incidental,
progressive or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you. This warranty gives you specific legal rights and you may have other rights, which vary from state to state.
The Flex-a-lite warranty is in compliance with the Magnuson-Moss Warranty Act of 1975.
This model does not include thermostatic control
Red motor wire should be positive +. Black motor wire should be negative -
Washer
This fan is designed to mount as a puller.