Owners manual

24 Volt, Universal Fit; Pt. #18024
INSTALLATION INSTRUCTIONS
REMOVAL OF EXISTING FAN AND SHROUD:
1. Make sure the engine is cool.
2. Disconnect negative (-) battery cable from battery of system.
3. Remove existing fan and shroud if needed.
Remove the original fan... and shroud
INSTALLATION OF NEW ELECTRIC FAN SHROUD:
4. Check fit of new fan assembly. Hold, or have a friend hold the fan in place while checking for possible
obstructions that may interfere with the blades or shroud. It may be necessary to move or tie back small hoses
or wires. If the fan does not fit at this point, additional modifications or a different Flex-a-lite fan may be re-
quired.
When you have a clear path... test fit and check for obstructions.

Summary of content (2 pages)