User Manual

MAIN WING INSTALLATION (CONTINUED)
7. Attach the interplane struts to the bottom wing using (4) M3x12mm Phillips head cap screws. While the struts are
directional and will only t one way, ensure that the logo is oriented outwards and on the bottom side of the strut, oriented upright.
8. Connect the aileron servo leads to either y-harness. Be sure to connect the left wing servo to the lead labeled AIL L, and right wing servo to
the lead labeled AIL R, then gently guide them inside the fuselage while mating the bottom wing to the fuselage.
9. Attach the bottom wing to the fuselage with (1) M3x70mm Phillips screws.
10. Re-attach the top wing to the cabanes using the (4) M2x6mm Phillips self-tapping screws removed in Step 5.
11. Attach the top wing to the interplane struts using (4) M3x12mm Phillips self-tapping screws.
11