User Manual

3
FPM3270A Mamba 10 Super PNP Green
FPM3270B Mamba 10 Super PNP Red
FPM327001 Mamba 10 Fuselage
FPM327002 Mamba 10 Wing Set w/Struts
FPM327003 Mamba 10 Tail set
FPM327004 Mamba 10 Hatch set
FPM327005 Mamba 10 Landing gear set
FPM327006 Mamba 10 Stab Tube Joiner Cabane
Tube Set
FPM327007 Mamba 10 Pushrod set
FPM327008 Mamba 10 Green/Blue Decal Set
FPM327009 Mamba 10 Red/Black Decal set
FPM327010 Mamba 10 Spinner 50mm
FPM327011 Mamba 10 Hardware Package
FPZM1010C Potenza 10 1400 Kv BL Motor
HW-BQ8015 Hobby Wing 50A Skywalker 5A BEC
FPZDS15 Potenza DS15 Digital Sub-Micro Servo
FPZA1015 Servo Custom Y-Harness (Mamba 10)
FPZAURA08ZZM10 Aura 8 for Mamba 10
REPLACEMENT PARTS LISTING
The assembly of the Mamba 10 can be accomplished in less than one
hour. Prior to assembling the airplane, it is advisable to charge your
battery so that you are ready to begin setup upon completion of the
assembly of your model.
We recommend the use of an advanced LiPo balancing charger, such as
our Potenza C80 Multi Chemistry Touch Screen AC/DC balancing charger
for your batteries to get the maximum performance and lifespan from
them.
Our airplanes are designed around our Potenza LiPo batteries and we
recommend the Potenza 3S 2200mAh 45C LiPo and the 4S 2200mAh 40C
LiPo in the Mamba 10 based on our extensive testing and development.
This battery features an EC3 connector, so no soldering is required for use
in your Mamba.
All are available online at www.exinnovations.com and your local Flex
Innovations retailer.
WARNING
FOLLOW ALL INSTRUCTIONS PROVIDED BY YOUR
BATTERY AND CHARGER MANUFACTURER. FAILURE
TO COMPLY CAN RESULT IN FIRE.
INSTALLED!
INSTALLED!
INSTALLED!
NEEDED TO
COMPLETE
NEEDED TO
COMPLETE
2200mAh 3S 11.1v 45C LiPo
(FPZB22003S45 )
3S 11.1v 2100-3300mAh minimum 45C+ LiPo
6-Channel Computer Transmitter*
Potenza 10 1400 Kv Brushless
Outrunner Motor (FPZM1010C)
HobbyWing SkyWalker 50A ESC
with 5V/5A SBEC (FTVHWBQ8015)
INSTALLED!
Aura 8 Advanced Flight Control System
(FPZAURA08)
Potenza DS15 Digital Full Metal
Gear 15g Servo (FPZDS15)
DSM2/DSMX remote receiver(s)
SRXL/S.Bus Futaba/Graupner HOTT/
JR XBus/Jeti UDI
5+ Channel RX (any brand)
NEEDED TO
COMPLETE
COMPLETION ITEMS
INCLUDED!
SR 11.5x4.5 Thin Electric Propeller
(FPMP11545E)
*DX4/5e class transmitter supported with special model program download
RECEIVER
SPECIFICATIONS
54.0 oz (1520g)
RTF with 3S 2200mAh
battery installed
40.7 in (1033mm)
43.4 in (1102mm)
691.3 sq. in
(44.6 dm2)
BATTERY CHARGING GUIDELINES
OPTIONAL COMPLETION ITEMS
Potenza 10 1070 Kv BL Motor
(For 4S LiPo Battery Only)
FPZB22004S40 Potenza 2200mAh 4S 14.8v 40C LiPo
C80 Multi-Chemistry Touch Screen
AC/DC Smart Charger
FTVHWBQ2006 Hobbywing ESC Programming Card
FPZA1010 Potenza Digital Battery Analyzer
FPZAU01 Male to Male Servo Connectors (3)
FPZ327012 Mamba 10 4CH Aileron Servo Ext. Kit
FPMTT2 TruTurn 2-in Aluminum Spinner
APC 12x4.5MR Propeller
(For 4S LiPo Battery Only)
FPZM1010D
FPZC80
LP12045MR