User Manual

MAIN LANDING GEAR INSTALLATION

Required Tools and Fasteners: #1 Phillips Screwdriver, (4) M3x12 self-tapping Phillips head cap screws

1. Insert the landing gear assembly into the slot in the bottom of the fuselage. The gear will sweep forward.

2. Install the cover plate over the landing gear slot and attach with (4)

M3x12 self-tapping Phillips head cap screws.

TAILWHEEL INSTALLATION

Required Tools and Fasteners: #1 Phillips Screwdriver, (3) M3x12 self-tapping Phillips head cap screws

1. Insert the tailwheel assembly in the slot in the bottom of the rudder.

2. Install the cover plate over the tailwheel slot and attach with (3)

M3x12 self-tapping Phillips head cap screws.