User Manual
SERVICING THE POWER SYSTEM
Required Tools and Fasteners: #1 Phillips Screwdriver, 13mm box wrench
1. Remove the propeller and spinner assembly from the motor.
2. Remove the (4) bolts holding the motor to the rewall using a #1 Phillips screwdriver. Disconnect the motor from the ESC.
3. To remove the ESC, simply unplug its lead from the receiver or Aura and the output leads from the motor.
OPTIONAL WHEEL PANT REMOVAL
For yers that want the lightest possible setup, or that y o of rough/unimproved elds, the wheelpants on the Mamba 10 are designed
to be removable. Two wheel collars have been provided in the hardware bag to retain the wheels after the wheelpants are removed.
Required Tools and Fasteners: #1 Phillips Screwdriver, 1.5mm hex driver, (2) wheel collars
1. Invert the airplane and locate the two wheelpant retaining screws and remove them. Slide the wheelpants and tires o of the axles.
2. Remove the wheel from the wheelpant and reinstall on the axle.
3. Slide the wheel collar onto the axle with the shoulder (oset) side towards the wheel. Tighten the set screw on the wheel collar.
TIP: reinstall the wheelpant retaining collar and screws to prevent losing parts in case you wish to reinstall them.
TIP: use blue threadlocker on the wheel collar set screw for added security.
19