Mamba 60 Final Manual

12
RECEIVER INSTALLATION/SERVO CONNECTIONS (CONTINUED)
If you are unsure which type of DSM remote receiver you
have, start by attempting the bind process with a bind plug
in S8. If you continue to have trouble binding, then insert
one bind plug in S1, and one bind plug in S8.
Note: It may be necessary to move the ESC lead to another open
port (such as 'Port B') during the binding precedure. Be sure to
return the ESC lead back to S1 after binding is complete.
Note: There are many JR-branded remote receivers that use
Spektrum DSM2 and DSMX RF protocol. For these, follow the
instructions as Spektrum remote receivers.
Connect (2) matching Spektrum remote receivers to Mini Port
'A' and Mini Port 'B' at the top of the Aura case.
To bind a DSMX Spektrum remote receiver connection, insert a
bind plug into Aura Port S8 .
To bind a DSM2 Spektrum remote receiver connection, insert a
bind plug into Aura Port S1 AND S8 .
ht battery to the ESC and the remote receivers
will begin re ready to bind. Follow
the instructions provided with your transmitter to complete the
bind process.
Once bound (indicated by both remote receivers showing a
solid orange LED), Aura will begin the Auto-Detect process,
indicated by sweeping LEDs on the Aura. Once complete, you
will see a solid orange (power and calibrated sensor) and solid
green (Aura receiving valid receiver data) LED, indicating that
the Aur dy state.
Mount your receivers using double sided foam tape or hook and
loop tape. Consult your receiver manual for proper mounting
orientations and procedures.
1.
2A.
2B.
3.
4.
5.
Please note, for optimum connection reliability and performance
using Spektrum, the Flex Team HIGHLY recommends the use of
a traditional receiver with SRXL (like the AR8010T or AR9030T).
Remote receivers may still be used at your own risk, however.
Spektrum Remote Receivers