Mamba 60 Final Manual

HORIZONTAL STABILIZER INSTALLATION

1. Locate both horizontal stabilizer and elevator assemblies, stabilizer tube, and the provided clear tape ( to secure stabalizers to fuse).

2. Slide the horizontal stabilizer tube into the fuselage (approximately centered).

3. Slide the left and right stabilizer-elevator assemblies onto the tube. Ensure the control horn orients the bottom of fuselage and that the

elevator joiner tabs are indexed properly. (Be sure to connect the JST connector for the stab spot lights as you slide the stabilizer into place.

(NIGHT version only.)

4. Apply a piece of the clear tape to each joint (top and bottom) between the stabilizer and the plastic mount on the fuselage.

DO NOT FORCE STABILIZERS INTO PLACE

Required Tools and Fasteners

(4) Clear Mounting Tape

Carbon Stab Tube