User manual

GE 5/GE 5 R
21
Using a dust extraction system
CAUTION!
– When using the wall sander, connect
a Class M dust extractor.
– If a dust bag is used which is not autho-
rised for use with dry construction dust,
the amount of dust particles in the air
may increase at the work place.
Over a prolonged period high concentra-
tions of dust in the air may damage
the human respiratory system.
 Insert the special dust bag for dry con-
struction dust into your dust extractor
according to the instructions supplied
with the dust extractor.
 Connect extraction hose to the dust
extraction system. Follow the operating
instructions for the dust extraction sys-
tem! Check the attachment!
If required, use an appropriate adapter.
NOTE
If your dust extractor requires a special
connector, the clip-on connection can
be removed and a matching adapter selec-
ted from the FLEX accessories range.
Attaching and changing the sanding
tools
CAUTION!
Before performing any work on the electric
power tool, pull out the mains plug.
 Remove worn sanding tool from
the Velcro pad.
 Place the sanding sheet in the centre
of the Velcro pad and press on.
 Conduct a test run to check that the san-
ding tool is clamped in the centre.
CAUTION!
Never use the Velcro pad as a sanding tool.
Never use the wall sander without the san-
ding sheet, otherwise the work surface will
be seriously damaged!
Switching the electric power
tool on and off
Switch on the machine:
 Press the switch (1.).
 To engage, press the locking button
and release switch (2.).
Switch off the machine:
 Press the switch briefly
Giraffe_alle.book Seite 21 Dienstag, 2. September 2014 4:29 16