User manual

GE 5/GE 5 R
24
Maintenance and care
WARNING!
Before performing any work, pull out
the mains plug.
Cleaning
WARNING!
Do not use water or liquid detergents.
 Regularly blow out the housing interior
and motor with dry compressed air.
 Blow out the sanding head and gimbal
bearing with dry compressed air.
Replacing Velcro or backing pad
 Take hold of the sanding plate together
with the sanding head to prevent
the sanding plate from turning.
 Turn the screw in an anti-clockwise
direction and remove.
 Disassemble the sanding head.
 Replace parts.
 Assemble sanding head in reverse
sequence.
Replacing the brush ring
 Remove the sanding head (see section
“Replacing Velcro or backing pad”).
 Loosen the retaining screws.
 Take the ring out of the housing.
 Insert a new brush ring into the housing
and screw in the retaining screws.
 Assemble sanding head in reverse
sequence.
Giraffe_alle.book Seite 24 Dienstag, 2. September 2014 4:29 16