Instruction Manual

ManualsBrandsFLEX ManualsElectrical EquipmentLED Luminaires

DWL 2500 12.0/18.0V

Manufacturer : AEC Lighting Solutions Co., Ltd.

Summary of content (13 pages)

PAGE 1
DWL 2500 12.0/18.0V Manufacturer : AEC Lighting Solutions Co., Ltd.
PAGE 2
493.635_DWL 2500_12.0_18.0.book Seite 2 Donnerstag, 19. September 2019 1:19 13 Instruction manual .....................................................
PAGE 3
493.635_DWL 2500_12.0_18.0.book Seite 3 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V Instruction manual Contents Important safety informations Meanings of signal words . . . . . . . . . . . . 3 Important safety informations . . . . . . . . . 3 GENERAL POWER TOOL SAFETY WARNINGS . . . . . . . . . . . . . . . . . . . . . . 4 SPECIFIC SAFETY RULES AND SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . 6 Technical specifications . . . . . . . . . . . . . 7 Overview . . . . . . . . . . .
PAGE 4
93.635_DWL 2500_12.0_18.0.book Seite 4 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. 1. Work area safety (a) Know your light. Read the manual carefully.
PAGE 5
493.635_DWL 2500_12.0_18.0.book Seite 5 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V (g) Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 265°F may cause explosion. (h) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire. 6.
PAGE 6
493.635_DWL 2500_12.0_18.0.book Seite 6 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V SPECIFIC SAFETY RULES AND SYMBOLS 1. Safety warnings for rechargeable LED work lamps (a) This power tool is intended to function as a rechargeable LED work light. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. 3.
PAGE 7
493.635_DWL 2500_12.0_18.0.book Seite 7 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V Instruction manual Technical specifications Machine type Lithium-ion battery Lighting duration Color temperature Total flux Weight according to “EPTA Procedure 01/2003” (without battery) Size (LxWxH) DWL 2500 12.0/18.0V LED rechargeable work lamp 12.0/2.5 18.0/2.5 V/Ah 12.0/4.0 18.0/5.0 12.0/6.0 ~ 3.
PAGE 8
493.635_DWL 2500_12.0_18.0.book Seite 8 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V Overview 1 2 3 4 5 8 Support frame LED unit Slot for battery Handle Mounting option for a tripod 6 7 8 9 10 USB port Control element Li-ion battery (2.5 Ah or 5.
PAGE 9
493.635_DWL 2500_12.0_18.0.book Seite 9 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V Operating instructions Instruction manual Battery state of charge WARNING Risk of electric shock! Before carrying out any work on the power tool, always remove the battery. Before switching on the power tool Unpack power tool and accessories and check that no parts are missing or damaged. Inserting/replacing the battery 1. Press charged battery fully into the power tool. 1.
PAGE 10
493.635_DWL 2500_12.0_18.0.book Seite 10 Donnerstag, 19. September 2019 1:19 13 Instruction manual DWL 2500 12.0/18.0V Adjusting light intensity The light intensity of the LED rechargeable work lamp can be adjusted by pressing "+" or "-". The LED display on the left indicates the remaining lighting duration.
PAGE 11
493.635_DWL 2500_12.0_18.0.book Seite 11 Donnerstag, 19. September 2019 1:19 13 DWL 2500 12.0/18.0V Assembly You can set up the LED rechargeable work lamp in any position with the aid of a support stand. Instruction manual Cleaning Electric power tool WARNING Do not use water or liquid detergents. 1. Remove dirt and dust from the housing with a paint brush or dry cloth. Repairs Repairs may be carried out by an authorised customer service centre only.
PAGE 12
493.635_DWL 2500_12.0_18.0.book Seite 12 Donnerstag, 19. September 2019 1:19 13 Instruction manual Device, accessories and packaging should be recycled in an environmentally friendly manner. Plastic parts are identified for recycling according to material type. WARNING Do not throw batteries into the household waste, fire or water. Do not open used batteries. Accumulators/batteries should be collected, recycled or disposed of in an environmentally friendly manner.
PAGE 13
Tel. Fax +49(0) 7144 828-0 +49(0) 7144 25899 info@flex-tools.com www.flex-tools.com Flex-North America, Inc. Warehouse/Distribution Center 2720 E. Phillips Road Greer, SC 29650 (877) 331-6103 (Customer Service) (888) 331-6104 (Fax) Flex-North America, Inc. US-Corporate Office 13057 West Center Street – Suite 6 Omaha, NE 68118 (402) 933-7759 (Office) (402) 933-7729 (Fax) www.flexnorthamerica.com 493.635 / 09–2019 / No responsibility for typographical errors. Technical changes reserved.