Manual

_____________________________________________________________________________________________________

Flex Membrane International Corp. 2670 Leiscz’s Bridge Road, Suite 400, Leesport, PA 19533

Tel: (610) 916-9500 Fax: (610) 916-9501 www.FlexRoofingSystems.com

Page 1

Product Data Sheet

FLEX POURABLE SEALER

(Produced by Sonneborn)

DESCRIPTION

Flex Pourable Sealer is a high-performance, single component, polyurethane-base, self-leveling pitch pan

sealant. Flex Pourable Sealer is self-priming and requires no mixing; it is simply poured in place and

cures to form a resilient, tough seal. Flex Pourable Sealer produces a flexible, long-lasting seal with

extraordinary adhesion, cohesion, elasticity and abrasion resistance.

THIS PRODUCT IS FORMULATED TO PROVIDE:

· Single component sealant which requires no mixing.

· Functions from - 40° F to 180° F.

· Bonds to most substrates without a primer.

· Resists penetration and puncturing by sharp objects.

· Resists permanent deformation from compression.

· Resists deterioration from weather, stress, movement, water, and aging without

distortion or failure.

SUGGESTED USES

Flex Pourable Sealer is used to seal objects that are difficult to flash requiring a pitch pan installation.

TYPICAL PHYSICAL PROPERTIES

Property Test Method Result

Service temperature range -40° F to 180° F

Expected life Up to 20 years

Shrinkage None

Movement capability ASTM C 719 ±25%

Tensile strength ASTM D 412 350 psi

Ultimate elongation at break ASTM D 412 800%

Lower temperature flexibility ASTM C 746 -40° F

Hardness at standard ASTM C 661 25 ±2

Conditions/Shore A

Accelerated weathering Atlas 6500 – watt xenon arc Excellent

VOC Content: 75.2 g/L or 0.63 lbs. of V.O.S. per gallon of material.

INSTALLATION

Surface Preparation Pitch pans or joints must be clean, dry, and free of any foreign materials for

optimum performance. Pitch pan surfaces must be structurally sound and free of all loose aggregate,

paint, oil, grease, asphalt, wax, mastic compounds, waterproofing compounds, or form release materials.

PAGE 1
Product Data Sheet FLEX POURABLE SEALER (Produced by Sonneborn) DESCRIPTION Flex Pourable Sealer is a high-performance, single component, polyurethane-base, self-leveling pitch pan sealant. Flex Pourable Sealer is self-priming and requires no mixing; it is simply poured in place and cures to form a resilient, tough seal. Flex Pourable Sealer produces a flexible, long-lasting seal with extraordinary adhesion, cohesion, elasticity and abrasion resistance.
PAGE 2
NOTE: Do not install when rain is expected before the sealant reaches initial cure. Substrates must be absolutely dry or bubbling may result. **All Flex Roof Systems require pitch pans to be made of Flexclad coated metal. METHOD OF APPLICATION 1) Install Flexclad Pitch Pan around the penetrating object according to Flex’s current specifications and details. 2) Fill bottom of pitch pans with concrete or other suitable fillers. Do not use other caulks or sand as a bottom bed in a pitch pan.