Installation Guide

ManualsBrandsFLEXCO ManualsStair Treads12.5-in x 54-in Cappuccino Vinyl Round Nose Stair Treads

Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674

P: 800.633.3151 | flexcofloors.com | Made in the USA

04.4.2018 | Page 1

TECHNICAL DATA SHEET

VINYL STAIR TREADS,

RISERS & STRINGERS

Vinyl Treads

Flexco vinyl stair treads, risers and

stringers are specifically designed for use

on all interior stairs, including pan-filled

concrete and wood substrates. Vinyl

Stair treads are extruded and molded

from a high-grade vinyl compound that is

solid, homogeneous and durable.

Flexco offers a variety of options within

the vinyl stair tread product line, including

treads with abrasive, smooth or ribbed

inserts in several standard colors.

Our vinyl stair treads are both affordable

and durable, without compromising

the good looks and quality you come

to expect. Flexco vinyl stair treads are

also non-conductive and resist scuffing,

gouging and most chemicals and

common substances.

Vinyl stair treads are ideal for indoor

use in most commercial, industrial

or residential applications, such

as schools, hospitals, department

stores, government buildings, hotels,

dormitories, sports complexes, airport

terminals, shopping malls and any other

public or private building.

• Does Not Require A Finish

• Extremely Durable

• ADA Compliant

• Optimized For Visually Impaired

• Excellent Chemical Resistance

• Excellent Slip Resistance

• 100% Recyclable

• Qualifies for LEED

Credits

• FloorScore

Certified

LEED v2009 IEQ Credit 4.1:

LEED v2009 IEQ Credit 4.3:

ASTM F2169 – Resilient Stair Treads:

ASTM F-2240 - Hardness:

ASTM E648 (NFPA 253) - Critical Radiant Flux:

ASTM E662 (NFPA 258) - Smoke Density:

ASTM F925 – Chemical Resistance:

ASTM D2047 – Slip Resistance:

ASTM F1515 - Light Stability:

ASTM F1514 – Heat Stability:

Acclimation Time:

Storage & Acclimation Temperature:

Qualifies

Type TV, Class 2, Group

1 & 2, Grade 1

Shore A, 85

Class I, > 0.45 W/cm2

Passes, <450

Passes (see chart)

> 0.6

Passes

48 Hours

65° - 85° F

Product Description

Technical Data Features

Approved Excelsior Adhesives

AW-510 Acrylic Wet-Set Adhesive

EN-610 Epoxy Nose Filler Adhesive

C-630 Contact Adhesive

TP-620 Pressure Sensitive Tape

MS-700 Modified Silane Adhesive

EW-710 Epoxy Wet-Set Adhesive

Availability, Cost & Samples

Flexco Flooring products are sold

through distribution. To locate the

nearest distributor, visit flexcofloors.

com or send an e-mail to info@

flexcofloors.com.

Technical Documents & Support

Additional product resources and

technical documents are available online

at flexcofloors.com. For additional

technical support, send an e-mail to

solutions@rhctechnical.com.

Additional Information

Summary of content (8 pages)

PAGE 1
T E C H N I C A L D ATA S H E E T Product Description Flexco vinyl stair treads, risers and stringers are specifically designed for use on all interior stairs, including pan-filled concrete and wood substrates. Vinyl Stair treads are extruded and molded from a high-grade vinyl compound that is solid, homogeneous and durable.
PAGE 2
Vinyl Treads T E C H N I C A L D ATA S H E E T VINYL S TA I R T R E A D S , R I S E R S & S T R I N G E R S Standard Ribbed Treads Standard Safety Rib Tread (LVT SN) Nose Type: Nose Length: Leading Edge Thickness: Back Edge Thickness: Tread Depth: Tread Length: Safety Strip Width (optional): Safety Strip Spacing: Safety Strip Material: Coordinating Landing Tile: Weight Per Lineal Foot: Treads Per Carton: Standard Safety Rib Tread (LVT RN) Adjustable Square Nose Type: Round 2" (39.
PAGE 3
T E C H N I C A L D ATA S H E E T 1. PRE-INSTALLATION CHECKLIST • • • • • • • • • • • • Consult all associated product literature concerning adhesive installation, maintenance and warranty prior to installation of flooring. Allow all trades to complete work prior to installation. Deliver all materials to the installation location in its original packaging with labels intact. Do not stack pallets to avoid damage. Remove any plastic and strapping from product after delivery.
PAGE 4
T E C H N I C A L D ATA S H E E T sheet at a rate of 400 sq. ft. per gallon. When installing over concrete as moisture mitigation, material must be applied in two coats. Do not install flooring until moisture testing has been conducted per the appropriate standard and/or moisture mitigation has been installed and is dry to the touch. Do not install flooring in below grade areas when hydrostatic pressure is visible or suspected.
PAGE 5
T E C H N I C A L D ATA S H E E T based product prior to installation. Stringer substrates must be smooth, flat, flush, full and complete for the entire stairwell, in order to provide completed and adequate support for the stringer material. Ensure any minor gaps between steps and stringer substrate are free of any dirt, dust and debris.
PAGE 6
T E C H N I C A L D ATA S H E E T To aid in scribing and trimming the back edge of stair treads, a spacer (such as a carpenters level, 1" x 2" wood or equivalent) is required to set the depth of the tread. Prior to cutting the back edge of the stair tread, measure the depth of the step and the thickness of the spacer. Rough cut stair tread to be at least 1/4" deeper than the step but no deeper than the width of the spacer.
PAGE 7
T E C H N I C A L D ATA S H E E T specific product in use. Be sure to follow instructions based on substrate porosity (porous or non-porous). See chart below for reference. When installing adhesive on steps, be sure to leave a 1/2" - 3/4" space on either side of step nose to accommodate the Excelsior EN-610 Epoxy Nose Filler Adhesive and avoid adhesive cross-contamination. Prior to installing the stair tread into adhesive, apply a 1/4" - 1/2" bead of the EN-610 to the interior nose of the stair tread.
PAGE 8
T E C H N I C A L D ATA S H E E T Vinyl Treads VINYL S TA I R T R E A D S , R I S E R S & S T R I N G E R S or the associated product technical data sheet. For further information regarding daily or routine maintenance, please consult the product care & maintenance document or the associated product technical data sheet. 9. FLOORING PROTECTION Protect newly installed stair treads, risers and stringers with construction grade paper, such as Ram Board, to protect material from damage by other trades.