Installation Guide
Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674
P: 800.633.3151 | flexcofloors.com | Made in the USA
12.29.2017 | Page 1
TECHNICAL DATA SHEET
SCULPTED TP WALL BASE
Base Sculptures
™
Flexco Base Sculptures
™
wall base is a
TP sculpted wall base. Base Sculptures
™
wall base is incredibly durable, allowing
it to stand up to a wide range of use
when compared to vinyl wall base. Base
Sculptures
™
wall base comes in a variety
of profiles that are meant to combine
the look of specialty wood trims with the
flexibility of a TP wall base.
Base Sculptures
™
wall base is designed
for use in both commercial and
residential wall base applications. Base
Sculptures
™
wall base is available in
several heights, from 2 5/8" to 7 3/4",
and is designed to match a wide variety
of flooring installations and application
requirements.
Base Sculptures
™
wall base is
FloorScore
®
certified, can contribute to
LEED
®
credits and meets a variety of
VOC requirements. Base Sculptures
™
wall base is manufactured in the USA.
• Phthalate Free
• Extremely Durable
• Extremely Flexible
• Available in Wide Variety of Sizes
• Will Not Shrink, Gap or Cup
• Recyclable
• Qualifies for LEED
®
Credits
• FloorScore
®
Certified
Features
Profiles / Styles:
Nominal Height - Harmony:
Nominal Height - Regal:
Nominal Height - Captivate, Merit:
Nominal Height - Bliss, Charisma, Whimsical:
Nominal Height - Triumph:
Nominal Height - Enchanted:
Nominal Height - Noble:
Nominal Height - Escalate, Marquis:
Nominal Height - Reflection:
Thickness - Merit
Thickness - Captivate, Escalate, Noble, Reflection:
Nominal Thickness - All Others:
Length - Charisma, Harmony, Merit, Reflections:
Nominal Length - All Others:
Carton Quantity:
LEED® v2009 IEQ Credit 4.1:
ASTM F1861 – Resilient Wall Base:
ASTM E648 (NFPA 253) - Critical Radiant Flux:
ASTM E662 (NFPA 258) - Smoke Density:
ASTM E84 - Flammability:
Acclimation Time:
Storage & Acclimation Temperature:
Bliss, Captivate, Charisma,
Enchanted, Escalate, Harmony,
Marquis, Merit, Noble, Regal,
Reflection,Triumph, Whimsical
2 5/8" (66.67 mm)
3" (76.2 mm)
4 1/4" (107.95 mm)
4 1/2" (114.3 mm)
4 5/8" (117.47 mm)
5" (127 mm)
5 1/4" (133.35 mm)
6" (152.4 mm)
7 3/4" (196.85 mm)
1/8" (3.2 mm)
1/4" (6.35 mm)
3/8" (9.53 mm)
40' Rolls (12.19 m)
8' Sections (2.44 m)
5 Pieces or 1 Roll (40' Total)
Qualifies
Type TP, Group 1 & 2, Style D
Class I, > 0.45 W/cm2
Passes, <450
Class A
48 Hours
65° - 85° F
Product Description
Technical Data
Approved Adhesives
AW-510 Acrylic Wet-Set Adhesive
WB-600 Acrylic Wall Base Adhesive
C-630 Contact Adhesive
Additional Accessories
Inside and outside factory rubber corner
blocks and mini-rubber corners are
available to match wall base installations.
Availability, Cost & Samples
Flexco products are sold through
distribution. To locate the nearest
distributor, visit flexcofloors.com or
send an e-mail to info@flexcofloors.
com.
Technical Documents & Support
Additional product resources and
technical documents are available online
at flexcofloors.com. For additional
technical support, send an e-mail to
solutions@rhctechnical.com.
Additional Information