Installation Guide

ManualsBrandsFLEXCO ManualsWall BaseCF25CB3P065

Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674

P: 800.633.3151 | flexcofloors.com | Made in the USA

12.29.2017 | Page 1

TECHNICAL DATA SHEET

TP WALL BASE

Base 2000

™

Flexco Base 2000

™

Wall Base is a

unique thermoplastic rubber (TP) wall

base product that is as attractive as it

is affordable. Base 2000

™

wall base is

incredibly durable, allowing it to stand up

to a wide range of use when compared

to vinyl wall base.

Base 2000

™

wall base is designed for

use in both commercial and residential

wall base applications. Base 2000

™

wall

base is available in various heights, from

2 1/2" to 6", and in cove or no toe to

match a variety of flooring installations

and application requirements.

Base 2000

™

wall base is FloorScore

certified, can contribute to LEED credits

and meets a variety of VOC requirements.

Base 2000

™

wall base is manufactured in

the USA.

• Extremely Durable

• Extremely Flexible

• Will Not Shrink, Gap or Cup

• 100% Recycleable

• Qualifies for LEED® Credits

• FloorScore® Certified

Features

Toe Styles:

Nominal Base Height:

Nominal Base Length:

Nominal Base Thickness:

LEED v2009 IEQ Credit 4.1:

ASTM F1861 – Resilient Wall Base:

ASTM E648 (NFPA 253) - Critical Radiant Flux:

ASTM E662 (NFPA 258) - Smoke Density:

ASTM E84 - Flammability:

CAN/ULC-S102.2 - Surface Burning:

Acclimation Time:

Storage & Acclimation Temperature:

Cove, No Toe

2 1/2" (63.5 mm)

4" (101.6 mm)

4 1/2" (114.3 mm)

6" (152.1 mm)

48" Sections (1.22 m)

120' Rolls (36.58 m)

1/8" (3.2 mm)

Qualifies

Type TP, Group 2, Style A & B

Class I, > 0.45 W/cm2

Passes, <450

Class A

FSR 10, SDS 60

48 Hours

65° - 85° F

Product Description

Technical Data

Approved Adhesives

AW-510 Acrylic Wet-Set Adhesive

WB-600 Acrylic Wall Base Adhesive

C-630 Contact Adhesive

Additional Accessories

Inside and outside factory corners,

rubber corner blocks and mini-rubber

corners are available to match wall base

installations.

Availability, Cost & Samples

Flexco products are sold through

distribution. To locate the nearest

distributor, visit flexcofloors.com or send

an e-mail to info@flexcofloors.com.

Technical Documents & Support

Additional product resources and

technical documents are available online

at flexcofloors.com. For additional

technical support, send an e-mail to

solutions@rhctechnical.com.

Additional Information

Summary of content (5 pages)

PAGE 1
Base 2000™ TP WALL BASE T E C H N I C A L D ATA S H E E T Product Description Flexco Base 2000™ Wall Base is a unique thermoplastic rubber (TP) wall base product that is as attractive as it is affordable. Base 2000™ wall base is incredibly durable, allowing it to stand up Features • • • Extremely Durable Extremely Flexible Will Not Shrink, Gap or Cup to a wide range of use when compared to vinyl wall base.
PAGE 2
Base 2000™ T E C H N I C A L D ATA S H E E T TP WALL BASE TPR Wall Base, Rubber Corner Blocks & Corners Cove Base No Toe Base Base Height: 2 1/2" (63.5 mm), 4" (101.6 mm), 4 1/2" (114.3 mm), 6" (152.1 mm) Base Thickness: 1/8" (3.2 mm) Base Length: 48" (1.22 m) Sections 120' (36.58 m) Coils Carton Quantity: 30 Pieces / 1 Coil Carton Weight - 2 1/2": 27 lbs. Carton Weight - 4": 39 lbs. Carton Weight - 4 1/2": 45 lbs. Carton Weight - 6": 60 lbs.
PAGE 3
Base 2000™ T E C H N I C A L D ATA S H E E T not install wall base materials in outdoor areas and in or around commercial kitchens. Do not install in areas that may be subjected to sharp, pointed objects. Do not allow product to be directly exposed to extreme heat sources, such as radiators, ovens or other high-heat equipment.
PAGE 4
Base 2000™ T E C H N I C A L D ATA S H E E T material firmly against the wall, allowing wall base to overhang corner in the direction that it will be installed. Use a pencil to mark the center of the corner on the back of the wall base, ensuring pencil line is straight and runs from the top of the wall base to the base of the toe. Reposition wall base material on a flat, stable surface, backside facing up.
PAGE 5
Base 2000™ T E C H N I C A L D ATA S H E E T TP WALL BASE the wall base can be painted with a high quality acrylic latex paint. Follow all primer and paint manufacturer’s recommendations and guidelines. Confirm proper maintenance procedures for paint prior to cleaning. 9. WARRANTY Flexco provides a 2 year limited warranty for all Base 2000™ wall base. For additional information, see associated warranty documents. FOR PROFESSIONAL USE ONLY.