Installation Guide

12.29.2017 | Page 2
Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674
P: 800.633.3151 | flexcofloors.com | Made in the USA
TECHNICAL DATA SHEET
TP WALL BASE
Base 2000
™
TPR Wall Base, Rubber Corner Blocks & Corners
Base Height:
Base Thickness:
Base Length:
Carton Quantity:
Carton Weight - 2 1/2":
Carton Weight - 4":
Carton Weight - 4 1/2":
Carton Weight - 6":
2 1/2" (63.5 mm), 4" (101.6 mm),
4 1/2" (114.3 mm), 6" (152.1 mm)
1/8" (3.2 mm)
48" (1.22 m) Sections
120' (36.58 m) Coils
30 Pieces / 1 Coil
27 lbs.
39 lbs.
45 lbs.
60 lbs.
Cove Base No Toe Base
Base Height:
Base Thickness:
Base Length:
Carton Quantity:
Carton Weight - 2 1/2":
Carton Weight - 4":
Carton Weight - 6":
2 1/2" (63.5 mm), 4" (101.6 mm),
4 1/2" (114.3 mm), 6" (152.1 mm)
1/8" (3.2 mm)
48" (1.22 m) Sections
120' (36.58 m) Coils
30 Pieces / 1 Coil
26 lbs.
38 lbs.
60 lbs.
Rubber Corner Blocks
Mini-Rubber Corner Blocks
1. PRE-INSTALLATION CHECKLIST
• Consult all associated product
literature concerning installation and
warranty prior to installation.
• Allow all trades to complete work
prior to installation.
• Deliver all materials to the installation
location in its original packaging with
labels intact.
• Inspect all materials to ensure there
is no damage.
• Do not stack pallets to avoid damage.
• Ensure installation area and material
storage temperatures are between
65º F (19º C) and 85º F (30º C) and
40% - 65% RH for at least 48 hours
before, during and after installation.
• Ensure HVAC system is operational
and fully functioning at normal
operating conditions 48 hours prior to,
during and 48 hours after installation.
• Protect installation area from extreme
temperature changes, such as heat
and freezing, as well as direct sunlight
for at least 48 hours before, during
and after installation.
• Do not proceed with installation until
all conditions have been met.
2. PRODUCT LIMITATIONS
Do not install materials over existing wall
base, flash-coved rubber, vinyl or linoleum
flooring, cork, or asphaltic materials. Do
Corner Type:
Corner Height:
Corner Thickness:
Corner Return Length:
Carton Quantity:
Carton Weight:
Inside & Outside
2 3/4" (69.85 mm),
4 1/4" (107.96 mm),
4 3/4" (120.65 mm),
6 1/4" (158.75 mm),
8" (203.2 mm)
1/2" (12.77 mm)
1"
15 Pieces
1.65 lbs. (2 3/4"), 2.1 lbs. (4 1/4"),
2.35 lbs. (4 3/4"), 3 lbs. (6 1/4"),
3.84 lbs. (8")
Corner Type:
Corner Height:
Corner Thickness:
Corner Return Length:
Corner Carton Quantity:
Inside Carton Weight:
Outside Carton Weight:
Inside & Outside
2 3/4" (69.85 mm),
4 1/4" (107.96 mm),
6 1/4" (158.75 mm)
0.060" - 0.080 " (1.5 - 2 mm)
1"
15 Pieces
0.67 lbs. (2 3/4"), 1.04 lbs. (4 1/4"),
1.53 lbs. (6 1/4")
0.77 lbs. (2 3/4"), 1.18 lbs. (4 1/4"),
1.74 lbs. (6 1/4")
Corner Type:
Corner Height:
Corner Thickness:
Corner Return Length:
Corner Carton Quantity:
Carton Weight - 2 1/2":
Carton Weight - 4":
Carton Weight - 6":
Inside & Outside
2 1/2" (63.5 mm), 4" (101.6 mm),
6" (152.1 mm)
1/8" (3.2 mm)
3"
30 Pieces
2 lbs.
3.8 lbs.
5 lbs.
Cove Base Factory Corners
Corner Type:
Corner Height:
Corner Thickness:
Corner Return Length:
Corner Carton Quantity:
Carton Weight - 2 1/2":
Carton Weight - 4":
Inside & Outside
2 1/2" (63.5 mm), 4" (101.6 mm)
1/8" (3.2 mm)
3"
30 Pieces
2 lbs.
3.8 lbs.
No Toe Base Factory Corners