Installation Guide

12.29.2017 | Page 5
Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674
P: 800.633.3151 | flexcofloors.com | Made in the USA
TECHNICAL DATA SHEET
VINYL WALL BASE
Vinyl Base
technical data sheet.
7. MATERIAL PROTECTION
Protect newly installed material with
construction grade paper or protective
boards, such as Masonite or Ram
Board, to protect material from damage
by other trades. Limit usage and foot
traffic according to the adhesive's
requirements. When moving appliances
or heavy furniture, protect wall base from
scuffing and tearing using temporary floor
protection.
8. PAINTING PROCEDURES
Vinyl wall base may be painted, if desired.
Once wall base has been cleaned and
wall base is free of all residues which
may interfere with bonding, the wall base
must be primed prior to final painting. Be
sure to select a high quality primer that
is recommended and compatible with
rubber and vinyl, such as a 100% acrylic
or a 100% acrylic latex paint primer.
Test compatibility on an un-installed
piece of wall base to confirm adhesion,
compatibility and performance.
Once the primer has properly dried,
the wall base can be painted with a
high quality acrylic latex paint. Follow
all primer and paint manufacturer’s
recommendations and guidelines.
Confirm proper maintenance procedures
for paint prior to cleaning.
9. WARRANTY
Flexco provides a 2 year limited warranty
for all Vinyl wall base. For additional
information, see associated warranty
documents.
FOR PROFESSIONAL USE ONLY. PLEASE CONSULT ALL ASSOCIATED TECHNICAL DATA SHEETS,
SAFETY DATA SHEETS, MAINTENANCE DOCUMENTS AND WARRANTY INFORMATION PRIOR TO
INSTALLATION.