JE SEAMOUNTS Item No.
01 Package Content (A) Parts Included Connecting Plate A x4 Frame Stiffener x5 Calling Bracket Left Frame Beam x2 L-Shaped Upper Vertical Post “ Right Frame Beam x2 L-Shaped Lower Vertical Post to Connecting Plate C x2 Connecting Plate B x4 Wire Grid Side Frame Beam Installation Template x1 (B} Accessory Packages Figures shown are for reference only. Please contact customer service if there are any accessories or tools missing.
A Safety Warning Step 2-A: Install Ceiling Bracket Parallel with Joists This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children. « Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact a professional installer for assistance. » The ceiling must be capable of supporting the combined weight of the garage rack and your stuff.
05 Step 2-B: Install Selling Bracket Perpendicular to Jolts 1. Use a stud finder to locate the wooden ceiling joists. Then use the installation template to mark the mounting points. Poncho Stud Finder Locate the Wooden Ceiling Joists AN Note: The Installation template is reusable for marking mounting points on each side. A Note: For a perpendicular Installation, ensure Marie Mounting Holes that the ceiling joists are 72" apart. 2. Drill a 2.4" (60mm) deep pilot hole with a 11/64" 3.
Step 4: Attach Vertical Posts to Ceiling Brackets me — Step 5: Attach Connecting Plate A to Brackets Attach L-shaped vertical posts to ceiling brackets using bolts {A) and nuts (B}. Tighten with socket Attach connecting plate Ato vertical posts and ceiling brackets using bolts (D), and tighten with hex key (G). wrench (E) and hex key (G). Make sure the distance between the posts are completely consistent with the figure shown.
2. Assemble the Side Frame Beams Step 7: Place and Fix the Frame Components A ble the side fi bi t boned fi b: til late B ing bolts (C). Empress © © side frame beams ta combined frames by connecting plate B using bolts (C). Pre Place the frame components to the posts, and fix the frame components using bolts {D), then tighten with tighten with hex key (F). hex key Note: Note: When placing the frame component, the side with the connecting plate B is at the bottom.
11 Tips A Use of Metal Expansion Bolt 1. For safety, be sure to use the screws provided in the product package. 2. Do not stack heavy objects together, please place them evenly. 3. Please do not stand below the racks for a long teems, and children are strictly prohibited from playing near the racks. The metal expansion bolt is needed if installing to a concrete ceiling (mental expansion bolts are not included). Manufacturer Limited Lifetime Warranty [J Tap the metal expansion bolt into the mounting hole.
