Installation Guide

09 10
STEP 3: Assemble the Vertical Posts
7
8
8
7
L-Shaped Upper Vertical Posts
L-Shaped Lower
Vertical Posts
Determine hanging height and then attach L-shaped/upright upper vertical posts
with L-Shaped/upright lower posts using bolts (7) and nuts (8). Tighten with socket
wrench (9) and hex key (10).
Note: Make sure that the
length of all the vertical
posts are uniform.
22'' - 40''
(560 - 1010mm)
Upright Lower Vertical Post
Upright Upper Vertical Post
22'' - 40''
(560 - 1010mm)
Note: To avoid misalignment of holes
when installing screws, do not tighten
any screws until all screws are loosely
installed. Then, tighten the screws one
by one.
Step 4: Attach Vertical Posts to Ceiling Brackets
Always install the vertical posts between the
bolts in the ceiling bracket. Do not attach the
vertical posts outside. Otherwise the ceiling
brackets will bend, causing personal injury or
damage to your stored items if they fall.
Attach vertical posts to ceiling brackets. Make sure the distance between the posts are
completely consistent with the figure shown below.
X
12
12
11
12
11
Attach L-Shaped vertical posts to ceiling
brackets using bolts (11) and nuts (12).
Tighten with socket wrench (9) and hex key
(10).
Attach upright vertical posts to ceiling
brackets using bolts (11) and nuts (12).
Tighten with socket wrench (9) and hex key
(10).
9 10
+