Seamounts Limited Warranty / me limited warranty offered by Seamounts covers defects in material or workmanship in new Seamounts products. \ This warranty extends to the original purchaser only and is non-transferable. Only consumers purchasing Surmounts products from authorized Seamounts retailers or resellers may benefit from our limited warranty.
a eee eT . TV Plate . M6 Nut PCs . 5x5 Allen Key . Wall Plate . Cable Management Clip . Bubble Level . 6 ft HDMI Cable Noah 20mm M5 X 20mm M6 X 20mm M8 X 20mm (4 PCS) (4 PCS) (4 PCS) (4 PCS) (4 PCS) (4 PCS) {C) Wall Mounting Screw Set (PCS) (PCS) (PCS) (D) Tools Needed for Assembly 01 Installation Steps ETO STEP 1: Loosen the nuts before mounting Please loosen two nuts (2) before mounting the wall plate. Wall plate TV plate STEP 2: Alternative A -Mounting on Solid Concrete 1.
STEP 2: Alternative B Mounting on Wood Studs 1. Identify where the studs in your wall are. Hold the paper template against the wall and make four marks on the studs where you will insert the screws. (Note: three marks per stud). 2. Drill four holes into the wall where you made the marks. The diameter of the drill bit should be 3/16" (5mm). The depth of the holes drilled should be 2.8" (70mm). 3. Secure the mount to the wall using screws (B1) with washers (B3). 2.
STEP 4: Hang the TV onto the Wall Plate Before attaching the TV plate to the wall plate, screw in the top nut first so that the TV would not slide off during installation. (Note: Do not fully tighten the top nut). In the end fully tighten the top and bottom nuts. BP aga Wall plate ape Be TA TIP Clip the cable management cover to the mount, and manage the cable neatly.