User Manual

Technical specifications
Created by EBCCW 00:06
Page 11 of 68
5478EN-3
2.3 Operating conditions
The circumstances under which the Spiral Elevator can be operated partly
depend on the materials selected. FlexLink has defined a number of
parameters within which the Spiral Elevator would be allowed to function.
Should the Spiral Elevator still be operated beyond these limiting values,
FlexLink cannot guarantee the good functioning of the Spiral Elevator.
As a standard no lighting is installed on the Spiral Elevator although this
can not be added as an option. Normal ambient lighting is sufficient to work
safely with the Spiral Elevator. The Spiral Elevator is not intended for use
in an open air environment or in an area with a risk of explosion, although
static safe materials are available.
If in doubt of the suitability FlexLink should be consulted.
Ambient temperature (in operation) 0 to +35°C
During transport / storage 5 to +40°C
Relative air humidity (RH) 30% to 95%, not condensing
Lighting Normal ambient lighting
Height Up to max. 2000 m above sea
level