User Manual

Maintenance

Inspection – safety devices

Protective and safety devices

Safety devices should be checked at regular intervals.

• Check the chain guard for roller chain transmission.

This guard must always be in place when the con-

veyor is in motion.

• Check the protective cover on the cleated chain con-

veyor return chain.

• Drive units type H, have a slack protection for the con-

veyor chain. Check that the slack protection plates are

in place, and that the chain does not slacken enough

to hang below the plates.

• Check the protective cover for the conveyor chain on

intermediate drive units and catenary drive units.

• There may be other types of guard which are specific

to your installation, and these must also be checked.

See the system documentation.

Chain guard for roller chain transmission

Slack protection plate for drive unit type H