User guide

6
5114899
Safety
1.3 Description of safety provisions
Before putting the system into operation some safety provisions are to be
taken care of. The purpose of these safety provisions is to protect the user,
the product and the system against undesired situations (damage). Without
these safety provisions FlexLink cannot give a guarantee on any damage
caused in absence of these safety provisions.
The table below gives a general description of the safety provisions re-
quired. Here it should be noted that only technically qualified employees
are allowed to work on the settings of the safety provisions!
. . . 1.3.1 Noise level
. The noise level produced by the XK conveyor system is under 70 dB(A).
1.3.2 Power supply
. Power such as electrical, pneumatic, etc.
Never bypass the safety system.
Before working on powered components (i.e. motors), pneumatic activa-
tors of power supply the main switch must be turned off and locked. The
key is retained by the service technician until work is finished.
Examples of service work include:
• Disconnection of wiring/tubing
• Replacement of components, i.e. motors, etc.
• Service work performed on the machine that cannot be seen from
the electrical cabinet.
For adjustment of photo-electric cells, inductive sensors, etc., power is re-
quired:
- Stop the system and wait until the moving parts have come to
a complete stop.