Use and Care Manual

Attach C-Clips to the white discs on the sides of the seat base with the rails. Line

up the holes of the C-Clip and white disc and fasten securely with a thumbscrew.

Place J-Brackets into the white indicators in the arms and slide the arms into the

sides of the seat base. Align the front of the arm with the front of the seat base

so that they’re even.

Step 3: Arms

Attach the C-Clip to the white discs in each corner to connect the back to the

arm. Line up the holes of the C-Clip and white disc and fasten securely with a

thumbscrew.

Step 4: Secure the Arms

Add C-Clips here

C-Clip & Thumbscrew

BUILD OUT FOR CHAIR

Note: The arm has a slit in the fabric on the bottom to allow the C-Clip to hold it.