Use and Care Manual

Attach the C-Clips to the white discs in each corner to connect the back to
the arm. Line up the holes of the C-Clip and white disc and fasten securely
with a thumbscrew.
Once you have your multiple seat
boxes and back units built, connect
them with a C-Clip in the middle to
make the loveseat or sofa.
Place J-Brackets into the white indicators
in the arms and slide the arms into the
ends of the seat bases. Align the front of
the arm with the front of the seat base so
that they’re even.
Step 5: Secure the Arms
Step 3: Connect the Seats Step 4: Add the Arms
C-Clip & Thumbscrew
8
BUILD OUT FOR LOVESEAT OR SOFA
C-Clip for connection
It is not required to connect
backs together side to side with
a C-Clip. Your order may include
extra C-Clips.
Note: The arm has a slit in the fabric on
the bottom to allow the C-Clip to hold it.