Installation Guide

FlexStoneProducts.com - 1 - 1/15
NOTE: Corner shelf includes a folding-triangle metal bracket with screw holes
which is designed to mount directly to the FlexStone wall panels. Be sure to peel
away protective masking from the ins
tallation area before securing the bracket.
Corner Shelf with Bracket
Please inspect packages for damage or missing pieces, and read instructions carefully prior to
installation. All FlexStone products come with a protective masking covering the image side of the
material. If you have any questions or issues, please call our customer support Monday through Friday
8:00 AM – 5:00 PM MST at 877-941-3662.
Visit FlexStoneProducts.com for up-to-date manuals, or to register your product warranty.
RECOMMENDED: Visit http://FlexStoneProducts.com/installation to access a walk-through video
and other useful installation information.
1 INSTALLATION OF CORNER SHELF
1.1) Position corner shelf bracket in desired corner at
desired height. Use a level to mark level lines in
pencil. Adjust alignment to include a slight forward
slope for water runoff.
1.2) Using drywall screws or other coarse-thread
screws, fasten each side of the bracket through
the FlexStone panels and the sheetrock.
1.3) Fold bracket and complete triangle by bending the
tab over to secure bracket. Dry fit the corner shelf
material over the bracket. If corner is out of
square, trim one side of shelf to achieve a tight fit.
1.4) Peel back protective masking from edges of shelf,
apply adhesive to top and bottom of bracket and
place FlexStone material over bracket like a
clamshell. Clamp until dry (24 hours).
1.5) Apply 100% silicone sealant to all joints where
corner shelf meets the wall panels. Follow any
directions on sealant tube.