Shower Base Install Instructions For missing items do not return to store. Please call 877-941-3662 (Monday – Friday 8:00 a.m. – 5:00 p.
Shower Base Instructions Please inspect packages for damage or missing pieces, and read instructions carefully prior to installation. If you have any questions or issues, please call our customer suppport Monday - Friday 8:00 a.m. - 5:00 p.m. MT at 877-941-3662. RECOMMENDED: Visit http://FlexstoneProducts.com/installation to access a walk-through video and other useful installation information.
Recommended Shower Drains: Brand Model # Description Oatey 42150 2" Brass No-Caulk Shower Drain Sioux Chief 827-2B 2" Shower Drain Brass Body Other Compatible Shower Drains: Brand Model # Description Sioux Chief 828-2 PVC No-Caulk Shower Module Drain Oatey 42044 2 in. 2-Part ABS Solvent Weld Shower Drain Oatey 42045 2 in.
FlexStone Shower Base Dimensions – 3– V.
Install Instructions 1. Before beginning the installation of the shower base, make sure that the sub-floor and stud walls are square and plumb. Cut a 5"x5" opening in the sub-floor to allow room for the drain. Follow the assembly instructions provided with your shower drain and ensure that the 2" drain waste pipe extends above the surface of the sub-floor and the height of the shower base. The product drawings on the previous page show the location of the drain for the shower base. 2.
Install Instructions DRAIN ASSEMBLY Strainer Upper Drain Body Silicone Sealant Shower Base Rubber Gasket Friction Gasket Lower Drain Body 5. Apply adhesive to the floor beneath the shower base. Using the entire tube of adhesive, apply dots of adhesive, about the size of a Hershey Kiss, spaced approximately 2.5 inches apart making sure the entire bottom of the shower base is supported. This will add additional stability and prevent the base from shifting position. 6.
Install Instructions Helpful Hint: Use a sheet of cardboard on top of the shower base floor to protect the base during the installation of the backer board and FlexStone wall panels. Backer Board FlexStone Wall Panel Nailing Flange Adhesive 2x4 Stud Shower Base Adhesive Sub-floor B Drain Cleaning and Maintenance Care and maintenance of your FlexStone shower base is easy using common household cleaners. Clean with a soft sponge or cloth, and a mild, non-abrasive cleaner.
Install Instructions SHOWER BASE THRESHOLD TEMPLATE Use this template to scribe the bottom of the FlexStone side wall panels before cutting to achieve a tight fit around the threshold of the shower base. FLEXSTONE WALL PANELS ARE 1/4 IN. THICK. 1. Cut paper template along the dotted line. 2. Place paper template on the bottom of the side wall panel where you plan to cut the panel for the threshold. 3. Using a marker, mark the panel according to the template. 4. Cut the panel along the marked line.
