SDS

ManualsBrandsFlexStone ManualsAdhesiveBeige Tub & Shower Surround Silicone Sealant - 10.1 oz

PerformanceProAdhesives.com Page 1 of 6

Revision Date: May 1, 2017Product Name: PRO-3000 Color-Tinted Silicone

Safety Data Sheet

100% SILICONE SEALANT

PERFORMANCE PRO

Mixtures - Hazardous Ingredients

Chemical Name CAS Number %

Ethyltriacetoxysilane 17689-77-9 1 – 5

Methylacetoxysilane 4253-34-3 1 – 5

Titanium oxide 13463-67-7 < 1

Distillates (petroleum), hydrotreated middle 64742-46-7 1 – 7

Octamethylcyclotetrasiloxane (impurity) 556-67-2 < 1

3. Composition / Ingredients

Suspected of damaging fertility. May cause eye/lung/skin irritation.

Obtain special instructions before use. Do not handle until all safety precautions have been read and

understood.

Wear protective gloves / protective clothing / eye protection / face protection. Wash well after handling.

Contaminated work clothing should not be allowed out of work place.

SKIN: Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical attention / advice. Get

medical attention / advice if you feel unwell.

EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.

Continue rinsing. If eye irritant persists get medical attention / advice.

If exposed or concerned: get medical attention or advice. Take off contaminated clothing and wash it before

reuse.

Store locked up.

Disposal of contents / container in accordance with local / regional /state / federal and international regulations.

None known.

This product reacts with water, moisture or humid air to evolve following compounds: Acetic acid

The following material is embedded in the product and not available as respirable dusts. When used as intended

or as supplied, the product will not pose hazards. Titanium oxide.

Health: 1

Flammability: 1

Physical hazard: 0

Physical Hazards: Not classified

Health Hazards: Reproductive toxicity (fertility) Category 2

Environmental Hazards: Not classified

OSHA Defined Hazards: Not classified

● Hazards not stated here are “Not Classified”, “Not Applicable” or “Classification not possible”.

GHS Label Elements

Signal Word: Warning

Hazard Statement:

Precautionary Statement:

Prevention:

Response:

Storage:

Disposal:

Hazard(S) not Otherwise

classified (HNOC):

Supplemental Information:

Substance(s) formed under

the conditions of use:

HMIS (Ratings):

2. Hazards Identification

Commercial Product Name: PRO 3000 COLOR-TINTED SILICONE

Product Classification: Silicone Sealant

Manufacturer: Distributor:

Silco Inc. Design Imaging, LLC

7635 St. Clair Avenue 1170 Industrial Park Rd.

Mentor, OH 44060 Orem, UT 84057

Phone: 440.975.8886 Phone: 844.328.3331

General Description: Silicone elastomer

Physical Form: Paste

Color:

Odor: Acetic acid odor

NFPA Profile: Health 1 Flammability 1 Instability/Reactivity 0

Note: NFPA = National Fire Protection Association

1. Product & Company Information

Trans Beige

Summary of content (6 pages)

PAGE 1
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet Product Name: PRO-3000 Color-Tinted Silicone Revision Date: May 1, 2017 1. Product & Company Information Commercial Product Name: PRO 3000 COLOR-TINTED SILICONE Product Classification: Silicone Sealant Manufacturer: Distributor: Silco Inc. Design Imaging, LLC 7635 St. Clair Avenue 1170 Industrial Park Rd. Mentor, OH 44060 Orem, UT 84057 Phone: 440.975.8886 Phone: 844.328.
PAGE 2
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 4. First Aid Measures Inhalation: Remove to fresh air. Call a physician if symptoms develop or persist. Skin Contact: Wash off with soap and plenty of water. For minor skin contact, avoid spreading material on unaffected skin. If skin irritation or rash occurs: get medical attention / advice. Take off contaminated clothing and wash before use. Eyes Contact: Immediately flush with plenty of water for at least 15 minutes.
PAGE 3
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 8. Exposure Controls / Personal Protection Occupational exposure limits US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.
PAGE 4
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 10. Stability & Reactivity Reactivity: No hazardous reaction known under normal conditions of use, storage and transport. Chemical stability: Stable at normal conditions. Possibility of hazardous Reactions: Hazardous polymerization does not occur. Conditions to avoid: None known. Incompatible materials: Strong oxidizing agents. Water and moisture.
PAGE 5
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 11. Toxicological Information (cont.) Reproductive Toxicity: Octamethylcyclotetrasiloxane administered to rats by whole body inhalation at concentrations of 500 and 700 ppm for 70 days prior to mating, through mating, gestation and lactation resulted in decreases in live litter size. Additionally, increases in the incidence of deliveries of offspring extending over an unusually long time period (dystocia) were observed at these concentrations.
PAGE 6
PERFORMANCE PRO 100% SILICONE SEALANT Safety Data Sheet 15. Regulatory Information US federal regulations: This product is a “Hazardous Chemical” as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. OSHA Specifically Regulated Substances (29 CFR 1910.