User's Manual

User's Guide Before You Begin
Page 1-7
1.3 The Three System LEDs
The Power LED
Below is how the LED would behave in different situations:
Off System is powered off, or in Hibernate mode.
On System is in full operation.
Blinking System is in Standby mode.
The Battery LED
Below is how the LED would behave in different situations:
Purple
Battery pack is being recharged: fast-charge or pre-charge.
Blue
Battery pack is in full power capacity.
Off
Battery pack is not under recharge.
Red Blinking
Battery pack is consuming down to 10% level.
Red Blinking Four
Times
Battery pack is consuming down to 6% level.
Red
Battery pack error.
The Stylus LED
The LED would be lit and system would start to beep for about ten seconds
when the system is powered off or in hibernate mode, and the stylus pen is not
inserted into the slot.
Note: For exact location of these Three System LEDs, please refer to the Rear View
diagram in Chapter 1.2.
For more details on Standby and Hibernate, please refer to Power Options in
the Control Panel of your Microsoft Windows™ operating system.