User Manual

ManualsBrandsFLIGHT MODEL ManualsHobbyExtra 300L ARF 175cc, 125 inch

？

、

Wing Span:3175mm/125in Radio:12 Channels

Wing Area:195.9sq.dm Engine: RCGF 175CC

Length:3206mm/126in Spinner:5"

CAUTION : this plane is not a toy and should be kept away

children under 16 years of age! Before use , please carefully read

this manual.

●First-time builders should seek advice from people having building

experience in order to assemble the model correctly and to produce its

performance to full extent .

●Assemble this kit only in places out of children’s reach!

●Take enough safety percautions prior to operating this model.

You are responsible for this model’s assembly and safe operation!

●Always keep this instruction manual ready at hand for quick

reference,even after completing the assembly.

Summary of content (12 pages)

PAGE 1
？、 Wing Span:3175mm/125in Radio:12 Channels Wing Area:195.9sq.dm Engine: RCGF 175CC Length:3206mm/126in Spinner:5" CAUTION : this plane is not a toy and should be kept away children under 16 years of age! Before use , please carefully read this manual. ●First-time builders should seek advice from people having building experience in order to assemble the model correctly and to produce its performance to full extent .
PAGE 2
WING ASSEMBLY Connect the aileron and the main wing by hinges. then Cut the servo holes on the bottom of the main wings Put the servo into the hole and fix it with screws.
PAGE 3
Put the servo into the hole and fix it with screws.
PAGE 4
Main Landing Gear And Rudder Use lock nuts to mount the carbon fiber landing gear to the bottom fuselage Inside the fuselage screw Install the rudder horns on each side of the rudder Connect the rudder and fin.
PAGE 5
Use the steel wire fixed the rudder as shown the picture (the rudder can removable) Install the Flexible steel wire for rudder Install the ball links and the control horn
PAGE 6
Insert the carbon fiber horns into the slots on the rudder Another way to install the rudder servo Cut the servo holes on the profile of the fuselage Install the ball links onto the servo arm and the control horn with stainless push rod horn
PAGE 7
Finished photo There are plywood tabs supplied for mounting your fuel tank Use the belt fixed it
PAGE 8
Install the exhaust pipes and throttle servo,as shown
PAGE 9
Draw the engine center line abd thrust line darker with a ball point according your your engine mounting location.
PAGE 10
CG POSITION & CONTROL THROWS
PAGE 11
THE FINISHED PHOTO Another scheme for choice Dong Guang Flight Model CO.,Ltd ADD:No.10,Fu Ning Street,Xian Xi Industrial,Chang An Town,Dong Guan City,Guang Dong Province,China Tel: +86-769-85070618 / +86-769-89790965 Fax: +86-769-85091868 E-mail:info@flight-model.com Web:http://www.flight-model.com/index.html Http://flight-model.en.alibaba.
PAGE 12