Instruction Manual

Components
1 Assembled POWER PCB
1* 12VAC 1000mA wall adapter
1 13” 18AWG DC power harness
1 DPDT power switch with hardware
1 2.1mm x 5.5mm x 9.5mm barrel-style AC jack with hardware
1 MTA156 4-pin 22AWG IDC connector (switch)
1 MTA156 2-pin 22AWG IDC connector (AC jack)
1 Red 5mm LED (V+)
1 Yellow 5mm LED (V-)
2 Molex SL-series 0.1” 2-pin housing (PCB end)
2 Molex SL-series 0.1” crimp terminals (PCB end)
2 Molex KK-series 0.1” 2-pin housing (LED end)
4 Molex KK-series 0.1” crimp terminals (LED end)
* Only part of standard PWBP
+ + +
+
2/7
g.1 g.2