User's Manual

TBox Installation and Operating Manual A
______________________________________________________________________________________________
page 7 of 7
Issue A
4 TBOX SOFTWARE
4.1 DESCRIPTION
The TBox Software is a computer program that provides the user interface to the
Sensor Unit.
The TBox Software enables the user to:
• Make/change Sensor settings
• View measured speed and ancillary data
4.2 SOFTWARE INSTALLATION
4.2.1 Host computer requirements
The Host Computer should have the following minimum specifications:
System Processor Intel Pentium III, 500 MHz or more
Memory 128 Mbytes or more
Display 800 x 600 or 1024 x 768 pixels, color
Hard Disk Drive 4 Gbyte or more
CD ROM Drive Optional
Flexible Disk Drive 1.44 Mbyte – required
Operating system Windows 2000, NT 4, Windows 98, or Windows
XP
Mouse and keyboard Required
USB interface port Optional
4.2.2 Installation of software
The TBox Software is automatically installed on the host PC from either the 1.44 Mbyte
flexible Diskette or CD ROM media supplied.
The software is supplied on both 1.44 Mbyte flexible disk and CD formats, and can be
installed on the host PC without the rest of the system connected.
1) Insert flexible diskette into 1.44 Mbyte diskette drive (alternatively, insert CD
into CD drive)
2) Run the
setup.exe application from the selected drive
o Examples: A:setup.exe (for a diskette in drive A:) or D:setup.exe (for a
CD in drive D: )
3) Follow the installation instructions
4) When the program files are successfully installed, press the “Finish” button.
4.2.3 Operation
Run the application in Windows, by selecting START > PROGRAMS > EDH > main.exe