Specification

ManualsBrandsFlint Garden ManualsCeiling Fans42 in. LED Chrome Crystal Retractable Ceiling Fan with Light and Remote Control

TECHNICAL INFORMATION

F4601

Installation & Operating Instructions for the

Owner’s Installation ,Manual

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

THANK YOU FOR YOUR PURCHASE

SAFETY RULES

SKU Rated Voltage Light CCT.Rated power(motor).

110-120V AC

4000K

F4601WH

56W

110-120V AC

3000K

F4601Y

56W

110-120V AC

4000K

F4601

56W

110-120V AC

3000K

F4601BZ

56W

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all

instructions before using the product

1. Mounting Bracket x1

2. Canopy screws x 2

3. Canopy x 1

4. Downrod&hanger ball x 1

5. Bolt x 1

6. Coupling cover x 1

7. Pin x 1

8. Top housing x 1

9. Blades x 4

10. Fan motor assembly x 1

11. Base plate x 1

12. Lamp shade x 1

13. Light pan x 1

14. Wood screws x 2

15. Expansion screw x 2

16. Plastic anchor x 2

17. Balance tapes x 4

18. Remote control x 1set

19. Crystal chain x 61

20. Crystal bead x 61

BEFORE INSTALLATION

Unpack your fan and check the contents.You should have followings:

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION. IF UNSURE CONSULT

A QUALIFIED ELECTRICIAN

INSTALLING THE FAN

Tools Required: Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.

INSTALLLING THE MOUNTING BRACKET

The ceiling fan must be installed in a location so that the blades are 300mm spacing from the tip of the blade to the nearest objects or walls. When hanging the Fan REMEMBER to turn off the power..

Follow the instruction below to hang your fan properly:

1. For the concrete ceiling, drill two holes in the ceiling

NOTE:Hanger after the installation must be able to withstand the weight of 45kg or more

and secure the mounting bracket to the ceiling with two

Φ8 (distance between the two holes should be

appropriate) expansion screws, flat washers,nuts

provided and tighten with a spanner.

2. For the wood ceiling, Secure the mounting bracket to the

ceiling is capable of carrying a load of at least 45KGS with

two long mounting screws and washers provided. Be sure

at least 30mm of the screw is threaded into the support.

3. Refer to the Fig. in right for mounting when the ceiling is

angled max. 15 degree angle.

110-120V AC

4000K

F4601BK

56W

1.To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be

performed by a qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "Acceptable for Fan Support of

45kg (99.12 lbs.) Or Less" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support

of light fixtures are not acceptable for fan support and may need to be replaced. Due to the complexity of the installation of this fan, a

qualified licensed electrician is strongly recommended.

5. The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45KGS. Use only

UL Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.

7. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for

most cleaning.

11. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The

wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

12. Electrical diagrams are for reference only.

13. The fan is suitable for indoor use only.

Summary of content (4 pages)

PAGE 1
F4601 Installation & Operating Instructions for the Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER CAUTION READ INSTRUCTIONS CAREFULLY FOR SAFE INSTALLATION AND FAN OPERATION. IF UNSURE CONSULT A QUALIFIED ELECTRICIAN THANK YOU FOR YOUR PURCHASE Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product BEFORE INSTALLATION Unpack your fan and check the contents.
PAGE 2
F4601 Installation & Operating Instructions for the Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER INSTALL THE DOWNROD Hanging the Fan REMEMBER to turn off the power. Follow the steps below to hang your fan properly: 1) Remove the bolt, lock pin and set screws from the top of the housing assembly 2) Route wires exiting from the top of the fan motor through the coupling cover, canopy and then through the ball / downrod.
PAGE 3
F4601 Installation & Operating Instructions for the Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MAKE THE ELECTRIC CONNECTIONS WARNING: To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring NOTE: Do not connect the motor supply cable to a dimmer switch. 1. Insert the receiver into the mounting bracket with the flat side of the receiver facing the ceiling. 2.
PAGE 4
F4601 Installation & Operating Instructions for the Owner’s Installation ,Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLATION Unpack your fan and check the contents.You should have followings: 1. Mounting Bracket x 1 2. Canopy screws x 2 3. Canopy x 1 4. Downrod&hanger ball x 1 5. Bolt x 1 6. Coupling cover x 1 7. Pin x 1 8. Top housing x 1 9. Blades x 4 10. Fan motor assembly x 1 11. Base plate x 1 12. Lamp shade x 1 13. Light pan x 1 14. Wood screws x 2 15.