Installation Manual

Thank you for your purchase! We will guide you step by step to
sync Flipper with your devices. But rst, some preliminaries:
Code updates, Video tutorials and FAQs
Online: FlipperRemote.com/Support
Email: [e-mail]
Telephone support also available online.
Start with your devices ON. Slide down the bottom half of Flipper
to reveal the 0-9 and setup buttons. See code list for codes listed
by Brand of your device.
Common Codes (see code list for others, and updates online,
FlipperRemote.com/Support click on Codes:
TVs: LG / Vizio preset code; Samsing 3831; Sony 3901; RCA
2601; Dynex / Insignia 3961, ONN 6691, 3441, 6871, 6881
STBs: Arris VIP 2262: 2744;
Arris DSR600: 2344; Bell: 2774; Cisco: 3234; Cisco ISB7000:
3224, 2544; ATT: 3224; Xnity: 3084; Dish: 2294, 2944;
Direct TV: 2794, Spectrum 2084.
Flipper is an IR remote control and requires direct line of
sight. Some boxes, Xnity and Dish may be set up in RF
Radio frequency. Make sure to “activate IR” (infra red) in
your set top box. See our FAQS online, or your box settings
/ manual.
2