Installation Manual

In some boxes, LC will trigger a Menu. If it does,

do not use LC;

In other boxes, LC will trigger a Menu only in 4 digit

channels. If so, then use LC for all but 4 digit channels.

1. Program Favs: Press and hold STB and ADD at same time till

light turns solid;

2. Add channels: (Try two to test):

a. Channel entry format: 7-LC-ADD; 44-LC-ADD;

for channels 7, 44;

3. Exit: Press and release the STB button to exit, test; Let the

channel change before pressing CH again;

a. If your box does not work with the LC, then delete or

reset (below) and try format: 23-ADD; 456-ADD, for 23,

456. (Using 0’s may speed changing in lower digits,

like 009).

4. If working, then add all your channels by repeating 2.

Deleting Favorites:

Press and hold the STB and DEL at the same time till light turns

solid, then enter the channel you want to delete, followed by

DEL: 12-LC-DEL or 12-DEL.

Please note that you must delete exactly what was programmed -

the resulting channel is not always what was programmed. This is

because if a channel is not in the channel lineup, then the box will

go to the closest channel.

Reset to factory settings: Press and hold ADD until the light

turns solid, enter 954.