Instructions / Assembly

Cobra Anchors Co. Ltd • 1-800-824-7717 • Canada: [phone] • www.cobraanchors.com
1/2"
13
mm
4
6
7
5
3
1/2" 5/8"
#2
May 2, 2019
HOLLOW WALL
SPECIFICATIONS, LISTINGS AND APPROVALS
Toggle Component: Carbon Steel AISI 1008/1010, Zinc plated as per
ASTM-B-633 Type III SCI.
Bolt Component: Carbon steel AISI 1022, Zinc plated as per
ASTM-B-633 Type III SCI.
Strap & cap Component: Plastic
Available Sizes: 10 - 24 & 1/4" - 20 (UNC) Imperial
M5 & M6 (ISO 261) Metric
KEY FEATURES & BENEFITS
MATERIALS
INSTALLATION INSTRUCTIONS
TOOLS REQUIRED
PLASTIC
STRAP
CAP
BOLTS
10 – 24 (M5)
1/4" – 20 (M6)
COMBINED HEAD
Phillips & slot
METALLIC HEAD
Comes in two sizes for
bolt with 3/16" & 1/4"
diameter (M5 & M6)
CAUTION : Always wear safety glasses.
Follow the drill manufacturer’s safety instructions. Use only solid carbide
tipped drill bits meeting ANSI B212.15 diameter standard.
NOTES:
• Technical data is provided for a proper use of the anchor.
• Safe working loads represent a safety factor of 2:1 from ultimate test loads.
To meet recommended load capacity, use the recommended style and
drill size.
• You must have at least 2.5" (63.5mm) of space behind the wall.
• A minimum of 1,5" (38mm) between anchors is recommended to prevent
material deterioration
• Loads may vary according to the quality of the drywall or hollow block.
1. Drill a hole of the recommended size.
2. Flip the metallic head of the FlipToggle
®
as shown, in order for it to be in line
and secured onto the plastic strap.
3. Insert the FlipToggle
®
into the drilled hole.
4. When completely inserted, pull the plastic strap towards you which will ip
the toggle at against the back of the wall.
5. Hold the strap towards you while pushing the cap until reasonably tight
against the wall.
6. Place your thumb on the strap next to the cap and bend downward sharply
to snap off the excess of the strap ush with the wall.
7. Insert the bolt through the xture, into the anchor and tighten it securely to
the metallic head.
Ideal for all type of hollow wall, up to 3" (75 mm) thick
Requires a 1/2" (13 mm) hole
Fast and easy installation
New one strap design for easier insertion and ipping operation
Can be used with any bolt length
Superior holding power