Specifications
4.5 Fistmic connection (Ray63 /
Ray73 only)
Front connection
The Fistmic can be connected directly to the front
connector on your Radio.
Rear connection
1. Handset extension cable (A80291)
2. Fistmic adaptor cable (A80296)
The Fistmic can also be connected to the Rear station
connection using the appropriate adaptor cables.
The Fistmic must NOT be used to create a second
station, as the operator will not have access to all Radio
functions or the information displayed on the Radio’s
LCD screen.
4.6 Secondary handset station
(Ray63 / Ray73 only)
The Raymic handset accessory can be connected to the
Secondary station connector located on the rear of the
radio, this will create a second fully functional station.
1. Primary station (Radio base station)
2. Handset extension cable (A80290, A80291 or
A80292)
3. Secondary station handset (A80289)
4. Panel mount fixings kit (R70438)
5. Handset adaptor cable with RCA audio (A80297)
6. Primary station passive speaker (A80542)
7. Secondary station passive speaker (A80542)
The Fistmic must NOT be used to create a second
station, as the operator will not have access to all Radio
functions or the information displayed on the Radio’s
LCD screen.
Wired handset extension cables
Handset station cabling can be extended using
approved extension cables.
The maximum length of cable from the Handset to the
Base station should not exceed 50 m (164 ft)
Connecting handsets and cables
Follow the steps below to connect handsets and
extension cables together.
1. If fitted, unscrew and remove the dust cap from the
relevant connector.
2. Ensure the cable connectors are correctly orientated,
before insertion.
3. Ensure connectors are fully inserted, before locking..
4. Tighten locking collars by Rotating clockwise.
4.7 SeaTalkng ® / NMEA 2000
connection
Your product can transmit and receive data to and from
devices connected on SeaTalkng ® or NMEA 2000 CAN
bus networks. Connection is established using the
SeaTalkng ® connector located on the rear of the unit.
1. Use the supplied SeaTalkng ® spur cable to connect
your product to your SeaTalkng ® network.
2. You can also use a DeviceNet to SeaTalkng ®
adaptor cable (not supplied) to connect your product
to an available spur on a NMEA 2000 network.
42
81381-3-en-US_A5_PRINT.pdf 42 5/4/2020 3:26:31 PM