Specifications

One Wireless speak

er can be connected to each

Wireless handset. Refer to 6.3 Connecting the wireless

speaker to the Wireless handset

for the connection procedure.

4.15 Wireless speaker – power

connection

The wireless speaker is an active speaker that requires

a 12 V dc power supply. The power cables should be

connected via a distribution panel or, if required directly

to a battery.

Refer to the Power distribution section for guidance on

connecting to a power supply.

In-line fuse and thermal breaker

ratings

The wireless speaker is internally fused, however it is

recommended that you ﬁt an inline fuse on the positive

wire of your product’s power cable or connect using a

thermal breaker.

In-line fuse rating Thermal breaker rating

2 A (refer to note below)

Note:

• The suitable fuse rating for the thermal breaker

is dependent on the number of devices you are

connecting. If in doubt consult an authorized

Raymarine

dealer.

4.16 Loud hailer connection

(Ray73 only)

A Loud hailer (M95435) can be connected to the radio

using the loud hailer wires.

Positive (+) hailer wire (Purple)

Negative (-) hailer wire (Gray)

Cables and connections 45

81381-3-en-US_A5_PRINT.pdf 45 5/4/2020 3:26:32 PM