Specifications

Item Description
8
Documentation
9 4 x M4 nuts, spring washers and M4x25
machine screws (For Panel mounting)
10
Protective antenna boot
11
2 x M4x12 screws (For Fistmic hook plate
mounting).
12 SeaTalkng ® blanking plug
13
SeaTalkng ® 400 mm (15.7 in.) spur cable
2.5 Parts supplied – Ray63 /
Ray73
The parts listed below are supplied with the Ray63 and
Ray73.
Item Description
1 VHF Radio
2 Sun cover
3
Panel mount gasket
4 Fistmic
Item Description
5
Mounting bracket (Trunnion)
6
Mounting bracket knobs
7 Fistmic hook plate
8
4 x M4x25 screws (For Bracket (Trunnion)
mounting)
9
Documentation
10 4 x M4 nuts, spring washers and M4x25
machine screws (For Panel mounting)
11 Protective antenna boot
12
2 x M4x12 screws (For Fistmic hook plate
mounting).
13 SeaTalkng ® blanking plug
14
SeaTalkng ® 400 mm (15.7 in.) spur cable
2.6 Licensing
Prior to using this product please check your national
requirements for both operator and equipment licensing.
USA licensing requirements
FCC station license requirement
An FCC Ship Radio Station License and Call Sign are
not required for most recreational vessels travelling in
US waters. However, you must obtain a license if your
vessel travels to foreign ports.
Ships that use MF/HF single side-band radio, satellite
communications, or telegraphy must be licensed by the
FCC. You can obtain a Station License by filing FCC
Form 605.
Canada licensing requirements
You do not need a license to operate this product within
the sovereign waters of Canada or the United States of
America (USA).
You will need a license to operate this radio outside of
Canada or the USA. To obtain licensing information, visit
the Innovation, Science and Economic Development
Canada (ISED) (previously known as Industry Canada)
website: https://www.tc.gc.ca/eng/marinesafety/oep-
navigation-radiocomms-faqs-1489.htm.
Europe and rest of world licensing
requirements
Regulations in some areas require that an Operator’s
license is obtained before operating a VHF radio. It is
your responsibility to determine whether a license is
required in your area before operating this equipment.
Additional information – Ray53
The following additional information is required for
completing a license application in Canada and the US.
ISED ID
4069B-RAY501D
FCC ID
PJ5–RAY501
FCC Type
accepted
Parts 2, 15 and 80
Output power
0.75 watt (low) and 25 watt (high)
Modulation FM
Frequency range
155.500 MHz to 163.275 MHz
Additional information – Ray63
The following additional information is required for
completing a license application in Canada and the US.
ISED ID
4069B-RAY601D
FCC ID
PJ5–RAY601
Document and product information
19
81381-3-en-US_A5_PRINT.pdf 19 5/4/2020 3:26:30 PM